Make a statement with the Built2Offend Lover Banner, designed for those who love to push boundaries. This 18x10-inch banner adds a bold, eye-catching touch to any vehicle, giving your ride that unique edge you've been looking for. Made with high-quality vinyl, this banner is not only durable but also resistant to fading, ensuring it looks great for years to come. Whether you're hitting the streets or attending a car show, the Built2Offend Lover Banner is the perfect accessory to showcase your passion for the automotive culture. 🛞🔥

 Installation Guide: Built2Offend Lover Banner (18x10 inches) 

**Tools Needed:**
- 🧼 Squeegee or credit card
- 🎨 Masking tape
- 💧 Spray bottle with soapy water solution
- 🧽 Microfiber cloth
- ✂️ Sharp utility knife or scissors

**Step-by-Step Installation:**

1. **Prepare the Surface:**
   - Clean the area where you plan to apply the banner thoroughly with a soapy water solution and a microfiber cloth. Ensure the surface is free from dust, dirt, and grease. 🧼✨
   - Dry the area completely before proceeding.

2. **Position the Banner:**
   - Use masking tape to hold the banner in place on your vehicle, ensuring it is centered and aligned to your liking. 🎯
   - Step back to check that the banner is straight and adjust as necessary.

3. **Apply the Soapy Water Solution:**
   - Lightly spray the area with the soapy water solution. This will allow you to reposition the banner if needed during installation. 💧

4. **Begin Application:**
   - Peel back a small section of the backing paper from one end of the banner. 
   - Carefully start applying the exposed adhesive side to the surface, smoothing it down with a squeegee or credit card to remove any air bubbles or excess water. 📏

5. **Continue Applying the Banner:**
   - Slowly peel away the backing paper while simultaneously pressing the banner onto the surface. Use the squeegee or credit card to smooth out the banner, working from the center outward to remove any air bubbles or water. 🖐️

6. **Final Touches:**
   - Once the banner is fully applied, use the squeegee or credit card to ensure it is securely adhered, paying close attention to the edges. ✔️
   - If necessary, use a sharp utility knife or scissors to trim any excess material. ✂️

7. **Allow to Set:**
   - Let the banner sit for at least 24 hours to ensure it adheres fully before washing your car or exposing it to harsh weather conditions. 🕒🌤️

**Note:** For the best results, install the banner in a shaded area with moderate temperatures. Avoid installing in extreme cold or hot weather to prevent issues with the adhesive. 🌡️

Now your Built2Offend Lover Banner is ready to show off your love<3