B2O Incinerated Banner Decal Specifications:

• Size:10 x 20 inches 📏
• Material: Premium High-Quality Vinyl 🎨
• Durability: Weather-resistant, designed to withstand harsh outdoor conditions ☀️🌧️
• Finish: Matte finish for a sleek, non-reflective look ✨
• Adhesive: Strong adhesive for long-lasting application, but removable without leaving residue 💪🚫🧼
• UV Protection: Resistant to fading and discoloration due to sun exposure 🌞🛡️
• Scratch & Abrasion Resistant: Protects against wear and tear, keeping the decal looking new for years 🛡️🛠️
• Flexible: Conforms easily to curved surfaces, ensuring a smooth application on car windows 🚗🔄
• Dry Install Only: Easy dry install with no water required 💧🚫

These specifications highlight the durability and premium quality of your B2O Ghozt Banner Decal, emphasizing its long-lasting performance and sleek appearance.

How to Install Your B2O Banner Decal for Car Windows

Tools & Materials Needed:

• B2O Banner Decal 🏁
• Microfiber cloth 🧼
• Isopropyl alcohol or glass cleaner 🧴
• Squeegee or plastic card 💳
• Masking tape (optional) 📏

Step 1: Prepping the Glass 🪟

1. Clean the Glass Thoroughly:

   • Spray the glass with isopropyl alcohol or glass cleaner and wipe it down with a microfiber cloth to remove any dirt, grease, or oils. This ensures a smooth surface for your decal to stick properly. 🧼

2. Final Wipe:

   • Give the glass a final pass with a dry microfiber cloth to remove any remaining dust or moisture. The surface should be completely dry before installation. 🧽✨

Step 2: Installing the B2O Banner Decal 🚗

1. Position the Decal:

   • Hold the decal up to the window and align it where you want it to go. Use masking tape on the edges to temporarily secure it in place while you check the positioning. 🏁🔍

2. Peel & Stick:

   • Slowly peel off the backing paper from the decal, exposing the adhesive. Starting from one end of the decal, press it onto the glass, working your way across. Make sure to press firmly as you go. 💪

3. Squeegee Out Bubbles:

   • Use a squeegee or plastic card to smooth out the decal, starting from the center and moving outward. This will help push out any air bubbles for a clean, professional look. 👌💳

4. Remove Transfer Tape:

   • After the decal is fully applied, carefully peel away the transfer tape. Go slowly to ensure that the decal stays in place and no parts are lifted. 🎯

5. Inspect & Clean:

   • Take a final look to make sure everything is smooth and aligned. If you see any small air bubbles, you can gently press them out with your squeegee. Wipe down the surrounding glass to remove fingerprints. 🧼✨

Pro Tips:

• Install in the Shade: Avoid direct sunlight to prevent the adhesive from setting too quickly, which can make the decal harder to adjust. 🌥️
• Patience is Key: Go slow and steady for the best results. 😌